Haidl Original · Temporary roof drainage

An end to water damage during construction

Poor makeshifts cost you twice: first the hours for fitting and removing, then the damage when they tear off. ProfiTube holds – fitted in minutes, storm-proof, reusable for years. Tested in our own sheet metal roofing workshop.

Monteur hängt den ProfiTube-Einlaufstutzen werkzeuglos in die Dachrinne ein
  • Made in GermanyMade in Passau, Bavaria
  • Stainless steel + aluminiumStainless steel sockets, aluminium retaining plates
  • ReusableOne system for many sites instead of throwaway sheeting
  • Tested in practiceIn use on the sites of the Haidl sheet metal roofing business

You know the problem

Duct tape won't hold against an autumn storm

The flexible drainage pipe doesn't fit the gutter outlet. So it gets taped, wired, knotted. That costs hours fitting and removing – and after the next rain, it's all hanging off the facade anyway.

  • TimeEvery makeshift is improvised from scratch: fit, patch, remove. Hours nobody pays you for.
  • DamageIf it tears off, water runs into the facade: mould, an angry client – and repairs at the weekend.
  • CrewWeekend call-outs and patch-up jobs wear your crew down. Good people are hard to find – and easy to lose.
Herkömmliches Fallrohrprovisorium mit Klebeband am Einlaufstutzen
Before

Makeshift with tape and wire

Hours spent improvising, torn down by the next storm. Afterwards: facade damage, mould, an angry client – and your crew doing repairs at the weekend.

ProfiTube Light Adapter sitzt mit Halteblech fest auf dem Einlaufstutzen
With ProfiTube Light

Push on. Tighten. Done.

The funnel shape slips over the outlet, the retaining plate hooks into the gutter bead, the knurled thumb screw locks the hose. No tools, no residue – fitted in minutes, removed in minutes. Your weekend is yours again.

“Quick to fit, watertight and ready to use straight away. It's now standard for us.”

Customer review from the shop · ProfiTube Light

Two solutions

ProfiTube or ProfiTube Light?

Two different products for the same job: replacing the missing downpipe during construction. The difference is the hose.

The complete system
ProfiTube Komplettsystem: Set mit Dachanschlüssen, Endstücken und Spiralschläuchen

ProfiTube

Fixed drainage system with its own hoses – everything in the set.

  • HoseIncluded in the set: antistatic spiral hose, 100 mm, with steel wire
  • ExtendingInfinity plug-in system in stainless steel, endlessly extendable, watertight even horizontally
  • Where it's usedGutter outlets, internal drains, parapet/flat roof drains
  • Drain size80–110 mm with seal, 120 mm without
  • Available asSets from 12 to 100 m of hose
View the sets
The adapter
ProfiTube Light Adapter am Einlaufstutzen im Neubau montiert

ProfiTube Light

Adapter for flexible drainage pipe – the yellow or black temporary downpipe without holes.

  • HoseNot included: you use your existing flexible drainage pipe (yellow or black; DN 100, outside diameter 100 mm, inside diameter 91 mm)
  • FixingFunnel shape to push on, knurled thumb screw as a lock, aluminium retaining plates
  • Where it's usedGutter outlet (40 cm retaining plate) and parapet/flat roof drain (24 × 12.5 cm angle plate) – both included. Also for horizontal and internal drains.
  • DiameterFor downpipes up to 110 mm (inside Ø of the adapter: 118 mm). 120 mm drains: can be used on the tapered funnel-shaped gutter outlet
  • Available asSingle, set of 5, set of 10
Go to ProfiTube Light
ProfiTube Light waagerecht am Flachdach- und Attikaablauf montiert

Both work on the flat roof

ProfiTube attaches directly to the parapet drain (80–110 mm with seal). ProfiTube Light comes with its own flat roof retaining plate for this – just swap the retaining plate, done. Whichever you choose: Cable protection conduit already in stock? → ProfiTube Light. Complete solution with hose and plug-in system? → ProfiTube Set.

Fitted in minutes: swap the retaining plate to suit the application

On the gutter outlet

  1. Loosen the knurled thumb screws.
  2. Slip the ProfiTube socket over the rubberised end.
  3. Hook the retaining plate into the gutter bead.
  4. Tighten the thumb screws at the right height in the slot – the gutter carries the weight of adapter and hose.

Horizontal, parapet and internal drains

  1. Loosen the knurled thumb screws.
  2. Slip the socket over the horizontal or internal drain (shorten first if needed).
  3. Bring the angle plate close to the wall.
  4. Set a wall plug through the slot and secure it.
  5. Tighten the thumb screws.

The system

From the gutter to the ground drain – one system

Five components, following the water from top to bottom. Every connection watertight, every fixing tool-free.

Gutter outlet for pitched and flat roofs

Aluminium hook-on plates give a secure hold on the gutter – fixed with the built-in knurled thumb screws, no tools and no residue.

  • 80–110 mm drain diameter with seal
  • 120 mm without seal
  • For gutter outlets, internal drains and parapet drains
ProfiTube Einlaufstutzen mit Aluminium-Halteblechen und Rändelschrauben

Flexible, antistatic spiral hose

UV- and weather-resistant with embedded steel wire, 100 mm diameter. Lasts through autumn and winter too – site after site.

Flexibler ProfiTube Spiralschlauch, 5 Meter

Infinity plug-in system in stainless steel

Male-female connection: combine as you like and extend endlessly – for any building height. Thanks to the built-in seal it's watertight even horizontally. Clamp lever on the outside, fitted without tools.

Infinity-Stecksystem: Edelstahl-Steckverbindung zweier ProfiTube-Schläuche

Fixing to scaffolding and facade

Adjustable pipe clamps hold the system on the scaffolding or the facade. ProfiTube sits firmly and stays out of your way while you work.

ProfiTube Befestigungs-Set mit verstellbaren Rohrschellen

Outlet socket at the ground drain

Firmly coupled to the ground drain pipe with knurled thumb screws and retaining plates. Impossible to tear out – even in heavy rain and storms.

ProfiTube Ablaufstutzen, verschraubt am Bodenablauf

On site

See it instead of reading it: the system in use

The complete system explained

From the gutter outlet for pitched and flat roofs to the Infinity plug-in system – shown step by step.

ProfiTube Light on the outlet

Finally a secure, quick connection for flexible drainage pipe – without duct tape.

Sets & prices

Choose your ProfiTube Set or the ProfiTube Light adapter to suit your requirements on site:

For planners & contractors

Questions about ProfiTube?

Call us directly - we're often on site ourselves and happy to answer your questions without a queue. Architects and planners can download the ready-made ProfiTube tender specification text on the right: